Microcontrollers small, self-contained computers are
the brains inside dozens of the devices and appliances in your home.
Microwaves, washing machines, telephones, and stereos all have
microcontrollers inside them. A microcontroller is a
computer-on-a-microchip, and includes a processor, memory for storing
data, timers, and ports for connecting to other components. As our
everyday devices become increasingly smart with embedded technology,
microcontrollers are becoming more and more important.
This kit introduces you to microcontrollers, sensors, and
programming through 100 experiments. Build devices that use sensors to
monitor and record data, and use the data to control motors, buzzers,
lights, and a digital display. Write programs to control the devices you
build. For example, you can build a light meter using a light dependent
resistor and record the light levels in a room over a 12 hour period. Or
measure and record the temperature outside with a temperature sensor,
then graph the results. The number of possible experiments is infinite.
First, assemble a circuit and write a program, following
the detailed instructions in the manual. Then, upload the program to the
microcontroller using an infrared interface. The program tells the
microcontroller how to perform your experiment and store the data.
Finally, the data stored in the microcontroller can be downloaded to the
computer using the infrared interface.
The 100-page, full-color experiment manual guides your
circuit assemblies and programming. Ages 12 and up.
learn how computers and programs work
assemble circuits and write programs
design your own circuits and programs
conduct experiments with light, heat and sound sensors
store your work in a sleek, portable case
use your devices to collect many types of data for other science
Software System Requirements
PC with Microsoftฎ Windowsฎ 98, 2000 or XP operating
Minimum 64 MB of RAM
Minimum 5 MB of free hard disk space
Available 9-pin serial (COM) or USB port
Power Supply Requirements
Requires one 9-Volt Battery (not included) or a
standard Power Adapter (not included). Adapter specifications: DC 9-Volt
output, barrel connector with out diameter of 5.5 mm and inner diameter
of 2.5 mm, positive pole on outside, negative pole on inside. Do not use
a "switch-mode" type adapter.
12 and up
microcontroller module dual digital display
module 3 transistors 7 light emitting diodes
motor light sensor (light dependent
resistor) temperature sensor (negative
temperature coefficient type) potentiometer,
microphone buzzer diodes capacitors
resistors switches wires contact clips
infrared interface device USB to 9-pin serial
adapter (RS-232 type) software CD and